Ford Escape Idle Relearn Tutorial

Ford Escape Idle Relearn Tutorial

Because your vehicle’s engine is electronically controlled by a computer, some control

conditions are maintained by power from the battery. When the battery is disconnected or a

new battery is installed, the engine must relearn its idle and fuel trim strategy for optimum

driveability and performance. To begin this process:

1. With the vehicle at a complete stop, set the parking brake.

2. Put the gearshift in P (Park), turn off all accessories and start the engine.

3. Run the engine until it reaches normal operating temperature.

4. Allow the engine to idle for at least one minute.

5. Turn the A/C on and allow the engine to idle for at least one minute.

6. Drive the vehicle to complete the relearning process. 

•  The vehicle may need to be driven to relearn the idle and fuel trim strategy. 

When the battery is disconnected or a new battery installed, the transmission must relearn its adaptive strategy. As a result of this, the transmission may shift firmly. This operation is considered normal and will not affect function or durability of the transmission. Over time the adaptive learning process will fully update transmission operation to its optimum shift feel. If the battery has been disconnected or a new battery has been installed, the clock and the preset radio stations must be reset once the battery is reconnected. 

---

ATF OIL LEGEND FOR ALTERNATIVE OIL

---

DM == Dexron®/Mercon®

DVI==Dexron® Vi

MV ==Mercon® V

MLV ==Mercon® Lv

MULV ==Mercon® Ultra Lv

LG6 ==Lifeguard® 6

LG8 ==Lifeguard® 8

DHP ==Dexron® Hp

GFS ==Gear Fluid Supplement * Use A Synthetic Base Fluid If The Vehicle Is Subject To Severe Duty Or Operates In Extreme Temperatures.

SYN ==The Use Of A Synthetic Base Fluid Is Requested